GS Heating
Which Trusted Trader
Gas Safe Register

Power Flushing for central heating systems in the West Midlands and Surrounding Areas

Power Flushing

Have you ever noticed your central heating water is black or orange? Do your radiators only get warm at the top? Is your boiler noisy or hot water going hot then cold? If this is the case then you may need a power flush,

A power flush uses a powerful pump at low pressure but high velocity to pump water and cleaning chemicals around your radiator until they are clean and hot all over. Not only will this increase the efficiency of your heating system it will save you money over time and help prevent expensive boiler problems like blocked heat exchangers

Here at Gs Heating we carry out a power flush and water treatment on every boiler we install.. this ensures that providing inhibitors are kept in the system your boiler should never have a failure die to sludge in the system!


In addition to the benefits mentioned above, the Compliance Guide to Part L of the UK Building Regulations for England and Wales requires a central heating system to be cleaned and flushed before a corrosion and scale inhibitor chemical is added during commissioning. It’s also prudent to do this when an old central heating boiler is being replaced by a new boiler. Many boiler manufacturers now make the warranty dependent on flushing and cleaning in accordance with BS7593, Benchmark and Part L.

Read More

Log Burners

Log Burners

GS Heating install a fantastic selection of multifuel / log burners and are HETAS approved engineers. From Modern and Contemporary to the more Traditional, we boast an impressive range to suit everyone’s Style and Budget, with expert advice to help you choose the correct Burner for you.

Log Burners, also known as wood burners or wood burning stoves have become a very popular replacement in the UK for open fires and are typically used for household heating. Traditionally constructed from cast iron or steel they burn wood based fuel such as logs, wood pellets or wood briquettes. The stove is connected to a flue system which extracts the hot gases produced by burning the fuel.

Read More

Hot Water and Cylinders

Hot Water and Cylinders

Whether you have a traditional Hot Water & Cylinder that is heated by the boiler, immersion heater or a high pressure unvented hot water cylinder, we are experienced and qualified to work on both.

We can replace or upgrade your traditional vented cylinder to a new Part L complaint cylinder which could save you up From £50 a year on heating your hot water.

We can install twin coil, solar ready cylinder at a later date as this could help you produce FREE hot water from a solar panel.

A little known fact: It is very important that who ever works on your unvented cylinder, they hold the correct qualifications, if these are incorrectly fitted they can become very dangerous.

Solar Hot Water

What better way to have free hot water in the summer , than by using the sun itself! With a twin coil cylinder and solar hot water panels you can do this , it takes a little planning  and installation but its something no one has ever regretted having done 

Read More

Gas Fires and Appliances

Gas Fires and Appliances

We Also carry out other gas appliances installation and servicing. Please see the list below of appliances we are qualified and experienced to work on

Gas Fires, service, repair and installation

Gas Cookers and hobs,

Gas and LPG Single and Multi point water heaters

Range cookers

Gas wall heaters

Having your gas fire serviced is of the upmost importance , your gas fire is open to the room so a annual service and safety check will ensure it is in good working condition and is Safe!

When we service your Gas fire we carry out  :

  • Visual check for damage
  • Check the fires safety devices
  • Remove the fire and check the chimney and closure space
  • Flue flow test
  • clean the burner and heat exchanger
  • Re assembly the gas fire
  • Testing of the gas pressure
  • Gas rate
  • Flue gas analyses where required
  • Spillage test
  • Test Co alarms
  • Any remedial work advised and noted
  • A full service certificate emailed
  • Gas tightness testing to ensure the whole property is gas tight
Read More

Boiler and Heating Controls

Boiler and Heating Controls

Boiler Controls, Saving you money!

Heating and boiler controls are as important as a New boiler itself, we offer the most efficient, advanced and user friendly controls available. We are experienced with Honeywell Evo Home, and Honeywell smart controls, Tado Smart controls, Hive and Nest just to name a few !

Are the old dial thermostats destined for the scrapheap?

For most of us, the room thermostat is a simple dial on the wall that allows you (in theory at least) to control the temperature of the home. These old style thermostats are not the most accurate of controls and now there are far more advanced ones available , the point being the new ones can save you money and fuel!

Honeywell Evohome, Hive and Tado

These systems ensure you’re always in charge of your home heating & stored hot water – wherever you are.

These controls have a simple to use control panel that lets you set the temperature in every room in your home – from anywhere in your home or elsewhere , The Honeywell Evohome can have up to 12 zones per control and as many radiator valve heads (HR92/90 ) as you want per zone , it can also control underfloor heating , The Hive and Tado now also have individual radiator thermostats that can be controlled via their Apps

Weather Compensation

With ever increasing fuel bills and the need to be as eco-friendly as possible, it’s important that we all look for ways to save fuel and carbon emissions – and money!
But there is a way to save even more –with just a simple outdoor sensor and some very clever Weather Compensation controls, now available on all manufacturers of combi condensing boilers.
For a relatively small investment you’ll not only save more fuel each year but you’ll also enjoy an incredibly comfortable home – with a pleasant indoor temperature – whatever the weather.

Heating – the basics

Our homes need heating, to replace heat lost through the walls etc. The colder it is outside, the more heat is lost and the more we have to heat the building, to replace that heat, especially in the winter when the heat loss is at its highest level.
This basic explanation is fundamental to understanding how an outdoor weather sensor can help to heat your home in a more efficient and cost-effective way.

Weather compensation controls work by ensuring that the boiler burns the exact amount of fuel required to match the heat lost from the building. The house will always be warm (at the desired temperature) and will never be too hot or too cold. Weather compensation significantly improves
efficiency under partial load conditions and is especially relevant for the UK climate, as for two thirds of the year the boiler will provide only a fraction of its maximum heat load, which means the boiler temperature is reduced for the majority of the year, while still maintaining a constant room temperature of 20ºC.

Read More

Boiler Repairs

Boiler Repairs

We carry out servicing, maintenance, repair and installation of gas heating systems and appliances.

Our Gas Safe engineers carry out fast and efficient boiler repair at competitive prices, all year round.  We’re skilled in quickly identifying faults on boilers, irrespective of boiler type, make or model.  We are able to find the problem swiftly and fix it.

We have a set charge for fault finding and then provide a fixed price for repair once the problem has been identified.  This ensures that there are no hidden surprises lurking around the corner.

Many companies may hide additional fees when coming out to a breakdown or repair.  At GS Heating and Electrical we are dedicated to ensuring our customers know exactly what they’re paying for, and that they are getting the best possible deal.  Most plumbers merchants have all the common parts in stock to deal with the majority of boiler repairs, and we go above and beyond to make sure we get it right first time.

Read More

Boiler Servicing and Cover

Boiler Servicing and Cover

Boilers should be serviced every 12 months, there are a number of reasons for this.  Even though new boilers often come with longer guarantees now.  All manufactures stipulate that the appliance still requires a yearly service.

More important than that though is that a regular service ensures that your boiler is running as cleanly and safely as possible.  Servicing should always be carried out by a gas safe registered engineer.

Our boiler servicing includes the following checks:

  • Visual Check for leaks and damage
  • Check of the boilers safety devices
  • Safe electrical isolation of the appliance
  • Opening and cleaning of the burner and heat exchanger
  • Re-assembly of the boiler
  • Testing of gas pressure
  • Gas rate
  • Flue gas analysis
  • Any remedial work advised and noted
  • Full digital service certificate
  • Gas tightness testing to ensure that the whole property is gas safe

Peace of mind – All work is guaranteed

All work is covered by our guarantee and no payment is requested until you are fully satisfied with the job.

We attend to boilers throughout the West Midlands and Worcestershire.  Covering the following areas:

  • Bromsgrove
  • Stourbridge
  • Redditch
  • Barnt Green
  • Rubery
  • Droitwich
  • Hagley
  • Kidderminster
  • Solihull
  • Kings Heath and Norton
  • Selly Oak
  • Harborne
  • Oldbury
  • And more!
Read More

Boiler Installation

Boiler Installations

Not many people are excited by the idea of buying a new boiler.  That is why we go above and beyond to make sure that the process of installing a new gas or LPG boiler is stress free.  We do all the hard work, leaving you to relax and enjoy your warm and efficient home.

We carry out boiler installations in Bromsgrove, Redditch, Stourbridge, Barnt Green and Rubery to name a few.  Covering the Birmingham area and Worcestershire.

Being Worcester, Veissmann, Baxi and Vaillant accredited installers.  You can be sure that you are in safe hands.

There are lots of benefits to upgrading your old or unreliable boiler or central heating system.  Apart from being sure that your home is always warm when you need it, a new ‘A’ rated efficient boiler can also help you reduce those ever increasing gas bills.

Contact us now for a free no obligation quote.

Read More



Bathrooms should be a place of relaxation and tranquillity.  Whether you like a long soak in the bathtub or a shower, It should always be a great experience.  That is why we consult with you every step of the way to make your bathroom space as great as it is in the movies.

We install bathrooms depending on your budget, all our work is carried out to the highest standards to current building regulations. We only use quality materials when installing your bathroom to give the best and long lasting finish.

Using the highest quality products to make sure that your bathroom is the place of relaxation that it should be.  

We can do:

  • Full bathroom refurbs
  • Tiling
  • Shower Installations
  • Flooring
  • Power Shower Installations
Read More

Power Flushing Boilers and Central heating radiators

I want to talk a little about water treatment in central heating systems.

Ive recently lost a few quotes ( i like to ask why) for boiler replacements due to the other companies Not Power flushing when changing from a conventional boiler to a sealed system and modern condensing boiler . They were a little cheaper, short term,

Now this is my personal opinion and view, but Every boiler i have replaced in the past 14 years i have power flushed when installing. and ive had 0 call backs due to sludge or system contaminates.

I also fit Magnetic filters , these seem to be sold as a ‘magic’ solution that means no other water treatment is needed . Its Not. if the system is dirty they will be overwhelmed in days and become .. useless ..

Other methods are hot and cold flushes, and a Magnaclense filter , these are great on a already clean system, but how do you know its actually clean without Powerflushing? You dont!

Power flushing uses high velocity water at normal working pressures, but can also be reversed to ‘shift the sludge and debris in the system, with the addition of flushing filters and chemicals this method is by far the best , and in the long run will save you money from breakdowns and fuel costs . Please consider this when looking though a quote

Read More
  • 1
  • 2